A Robust Antenna Provides Tactile Feedback in a Multi-legged Robot

Zhaochen J. Xu1,3, Juntao He2,4, Delfin Aydan2, Malaika Taylor1,
Tianyu Wang2,4, Jianfeng Lin1,3, Wesley Dyer3, Daniel I. Goldman3

  1. 1 Interdisciplinary Graduate Program in Quantitative Biosciences, Georgia Institute of Technology, Atlanta, GA, USA
  2. 2 George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
  3. 3 School of Physics, Georgia Institute of Technology, Atlanta, GA, USA
  4. 4 Institute for Robotics and Intelligent Machines, Georgia Institute of Technology, Atlanta, GA 30332, USA

Abstract

Multi-legged elongate robots hold promise for maneuvering through complex environments. Prior work has demonstrated that reliable locomotion can be achieved using open-loop body undulation and foot placement on rugose terrain. However, robust navigation through confined spaces remains challenging when body-environment contact is extensive and terrain rheology varies rapidly. To address this challenge, we develop a pair of tactile antennae for multi-legged robots that enable real-time sensing of surrounding geometry, modeling the morphology and function of biological centipede antennae. Each antenna features gradient compliance, with a stiff base and soft tip, allowing repeated deformation and elastic recovery.

Robophysical experiments reveal a relationship between continuous antenna curvature and contact force, leading to a simplified mapping from antenna deformation to inferred discrete collision states. We incorporate this mapping into a controller that selects among a set of locomotor maneuvers based on the inferred collision state. Experiments in obstacle-rich and confined environments demonstrate that tactile feedback enables reliable steering and allows the robot to recover from near-stuck conditions without requiring global environmental information or real-time vision. These results highlight how mechanically tuned tactile appendages can simplify sensing and enhance autonomy in elongate multi-legged robots operating in constrained spaces.

Figures

1 / 8

Scroll or use the arrows to browse. Click a figure to enlarge.

Figure 1

Antenna design and robotic platform

A compliant tactile antenna inspired by centipedes, integrated on the multi-legged SCUTTLE robot.

Figure 2

Biological antenna morphology

The antenna of Scolopendra subspinipes tapers from base to tip, motivating a descending stiffness design.

Figure 3

Antennae during wall-following

Sustained wall contact produces forward-pointing, backward-pointing, and straight antenna configurations.

Figure 4

Robotic antenna motion

Contact configurations and the controlled planar sweep used for calibration and testing.

Figure 5

Calibrating touch

Sensor measurements across three traverse speeds establish a mapping to normalized antenna bending.

Figure 6

Why compliance matters

A descending stiffness profile balances reliable contact sensing with the flexibility to avoid jamming.

Figure 7

From sensing to action

Bilateral antenna feedback selects forward, turning, and reversing maneuvers for confined traversal.

Figure 8

Navigating confined spaces

The antenna-equipped robot and a representative traversal through a narrow, cluttered environment.